BM2P074KF
PWM type DC/DC converter IC Included 800V MOSFET
BM2P074KF
PWM type DC/DC converter IC Included 800V MOSFET
The PWM type DC/DC converter (BM2P074KF-G) for AC/DC provide an optimum system for all products that include an electrical outlet. BM2P074KF-G supports both isolated and non-isolated devices, enabling simpler design of various types of low-power electrical converters. BM2P074KF-G built in a HV starter circuit that tolerates 800V, it contribute to low-power consumption. With current detection resistors as external devices, a higher degree of design freedom is achieved. Since current mode control is utilized, current is restricted in each cycle and excellent performance is demonstrated in bandwidth and transient response. The switching frequency is 65 kHz. At light load, the switching frequency is reduced and high efficiency is achieved. A frequency hopping function is also on chip, which contributes to low EMI. We can design easily, because BM2P074KF-G includes the switching MOSFET.
You can choose from a variety of power and topology evaluation boards.
For Automotive usage, please contact Sales.
Product Detail
Specifications:
AC Monitor Function
No
BR UVLO
No
Current Detection Resistors
External
Dynamic Over Current Detection
No
External LATCH Function
No
FB OLP
Auto Restart
Frequency Reduction Function
Yes
Over Current Detection Voltage (typ.)[V]
0.4
VH Terminal UVLO
No
FET
Integrated
Controller Type
PWM
Vin1(Min.)[V]
10.2
Vin1(Max.)[V]
26
Withstand Voltage [V]
800
SW Frequency (Max.)[kHz]
65
VCC OVP
Auto Restart
BR PIN
No
On Resistor (MOSFET)[Ω]
6.7
Channel
1
Light Load mode
Yes
EN
No
Soft Start
Yes
Thermal Shut-down
Yes
Under Voltage Lock Out
Yes
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
105
Package Size [mm]
5x6.2 (t=1.71)
Features:
- PWM frequency : 65kHz
- PWM current mode method
- Burst operation when load is light
- Frequency reduction function
- Built-in 800V start circuit
- Built-in 800V switching MOSFET
- VCC pin under voltage protection
- VCC pin overvoltage protection
- SOURCE pin Open protection
- SOURCE pin Short protection
- SOURCE pin Leading-Edge-Blanking function
- Per-cycle over current protection circuit
- Soft start
- Secondary Over current protection circuit
