BD9S012NUX-C (Under Development)
2.7V to 5.5V Input, 600mA Single Synchronous Buck DC/DC Converter for Automotive
BD9S012NUX-C is a synchronous buck DC/DC Converter with built-in low on-resistance power MOSFETs. It is capable of providing current up to 600mA. Small inductor is applicable due to high switching frequency of 2.2MHz. It is a current mode control DC/DC Converter and features high-speed transient response. It has an integrated feedback resistor that sets the output voltage to 1.1V and a built-in phase compensation circuit. Applications can be created with a few external components.
Product Detail
Functional Safety:
Specifications:
Grade
Automotive
Common Standard
AEC-Q100 (Automotive Grade)
ch
1
Integrated FET / Controller
Integrated FET
Topology
Buck
Synchronous / Nonsynchronous
Synchronous
Vin1(Min.)[V]
2.7
Vin1(Max.)[V]
5.5
Vout1(Min.)[V]
1.1
Vout1(Max.)[V]
1.1
Iout1(Max.)[A]
0.6
SW frequency(Max.)[MHz]
2.2
Light Load mode
No
EN
Yes
PGOOD
Yes
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
125
Package Size [mm]
2x2 (t=0.6)
Features:
- AEC-Q100 Qualified (Grade 1)
- Single Synchronous Buck DC/DC Converter
- Adjustable Soft Start Function
- Output Discharge Function
- Power Good Output
- Input Under Voltage Lockout Protection (UVLO)
- Short Circuit Protection (SCP)
- Output Over Voltage Protection (OVP)
- Over Current Protection (OCP)
- Thermal Shutdown Protection (TSD)
Design Resources
Documents
Technical Articles
Schematic Design & Verification
- Calculation of Power Dissipation in Switching Circuit
- Considering Input Filter to Reduce Conducted Emissions by DCDC Converter
- Considering Polarity of Power Inductor to Reduce Radiated Emission of DC-DC converter
- Method for Monitoring Switching Waveform
- PCB Layout Techniques of Buck Converter
- Phase Compensation Design for Current Mode Buck Converter
- Bootstrap Circuit in the Buck Converter
- Method for Determining Constants of Peripheral Parts of Buck DC/DC Converter
- Power Supply Sequence Circuit with General Purpose Power Supply IC
- Suppression Method of Switching Noise Using Linear Regulator and Low Pass Filter
- Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)
- Usage of SPICE Macromodel for DC/DC
- Snubber Circuit for Buck Converter IC
- Efficiency of Buck Converter
- Calculation of Power Loss (Synchronous)
- Inductor Calculation for Buck converter IC
- Considerations for Power Inductors Used for Buck Converters
- Capacitor Calculation for Buck converter IC
- The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit
- Resistor Value Table to set Output Voltage of Buck Converter IC
- Importance of Probe Calibration When Measuring Power: Deskew
- Impedance Characteristics of Bypass Capacitor
Thermal Design
- What Is Thermal Design
- Basics of Thermal Resistance and Heat Dissipation
- Method for Calculating Junction Temperature from Transient Thermal Resistance Data
- Notes for Temperature Measurement Using Thermocouples
- Two-Resistor Model for Thermal Simulation
- Notes for Temperature Measurement Using Forward Voltage of PN Junction
- Thermal Resistance
- Precautions When Measuring the Rear of the Package with a Thermocouple
Tools
2D/3D/CAD
- BD9S012NUX-C Footprint / Symbol
- VSON008X2020 Footprint / Symbol
- VSON008X2020 3D STEP Data