Low Power Input-Output Full Swing Operational Amplifier - BU7241GLow Voltage CMOS Op-Amp integrates one or two or four independent output full swing Op-Amps and phase compensation capacitors on a single chip. Especially, this series is operable with low voltage, low supply current and low input bias current.
| ||||
* This product is a STANDARD grade product and not recommend for on-vehicle devices. |
Grade | Standard |
Power supply(Min.)[V](+5V=5, +/-5V=10) | 1.8 |
Power supply(Max.)[V](+5V=5, +/-5V=10) | 5.5 |
Channel | 1 |
Circuit Current(Typ.)[mA] | 0.07 |
Input Offset Voltage(Max.)[mV] | 9.0 |
Input Bias Current(Typ.)[nA] | 0.0010 |
Slew Rate(Typ.)[V/µS] | 0.4 |
Input Voltage Range [V] | VSS to VDD |
Output Voltage Range [V] | VSS+0.1 to VDD-0.1 |
Voltage gain(Typ.)[dB] | 95.0 |
Output current(Typ.)[mA] | 10.0 |
CMRR(Typ.)[dB] | 60.0 |
PSRR(Typ.)[dB] | 80.0 |
GBW(Typ.)[MHz] | 0.9 |
Operating Temperature (Min.)[°C] | -40 |
Operating Temperature (Max.)[°C] | 85 |
- ・Operable with low voltage : +1.8[V] ~ +5.5[V] (single supply)
・Operable input-Output full swing
・Internal phase compensation
・Wide temperature range
-40[℃] ~ +85[℃]
・High large signal voltage gain
・Low supply current
・Low input bias current 1[pA](Typ.)
・Internal ESD protection
Human body model (HBM)±4000[V](Typ.)
PART NUMBER | Product Name | Package | Datasheet | Distribution Inventory |
---|---|---|---|---|
BU7241SG | Low Power Input-Output Full Swing Operational Amplifier | SSOP5 | Buy Sample | |
BU7242F | Low Power Input-Output Full Swing Operational Amplifier | SOP8 | Buy Sample | |
BU7242FVM | Low Power Input-Output Full Swing Operational Amplifier | MSOP8 | Buy Sample | |
BU7242NUX | Low Power Input-Output Full Swing Operational Amplifier | VSON008X2030 | Buy Sample | |
BU7242SF | Low Power Input-Output Full Swing Operational Amplifier | SOP8 | Buy Sample | |
BU7242SFVM | Low Power Input-Output Full Swing Operational Amplifier | MSOP8 | Buy Sample |
For Full Swing Low Voltage Operation CMOS Operational Amplifiers, Ultra Low Power CMOS Operational Amplifiers, Ground Sense Low Voltage Operation CMOS Operational Amplifiers
This application note explains the general terms and basic techniques that are necessary for configuring application circuits with op-amps and comparators. Refer to this note for guidance when using op-amps and comparators.
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
For ICs