Automotive 500mA Voltage Tracker - BD3925HFP-C
This IC is voltage trackers for automotive use which feature high withstand-voltage to 50V. They offer the output current loading to 500mA while limiting the quiescent current to 45µA(typ), so that they suit to apply for systems which are permanently connected to the car battery and requiring low-current-consumption. The offset is±15mV(for 5V output.6V
|Additional Feature||Offset Voltage = ±15mV|
|Operating Temperature (Min.)[°C]||-40|
|Operating Temperature (Max.)[°C]||125|
- ・Low dropout voltage/ Low quiescent current
・Built-in Overcurrent protection circuit/ Thermal shutdown circuit
|PART NUMBER||Product Name||Package||Datasheet||Distribution Inventory|
|BD42530FPJ-C||250mA Output Voltage Tracker||TO252-J5||Buy Sample|
|BD42500G-C||50mA Output Voltage Tracker||SSOP5||Buy Sample|
|BD42540FJ-C||70mA Output Voltage Tracker||SOP-J8||Buy Sample|
|BD42530EFJ-C||250mA Output Voltage Tracker||HTSOP-J8||Buy Sample|
|BD42530FP2-C||250mA Output Voltage Tracker||TO263-5||Buy Sample|
|BD3925FP-C||Automotive 500mA Voltage Tracker||TO252-5||Buy Sample|
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...
Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.
A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...
Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...
The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...
When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.
This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.
This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.
Provides some hints on how to connect LDOs in parallel.