Digital 16bit Serial Output Type Ambient Light Sensor IC - BH1730FVC
Digital output type ambient light sensor IC is composed of photodiodes, current-voltage converter circuit, A / D converter, control logic circuits, interface circuits and etc.It connects with I2C Bus in an equipment.
|* This product is a STANDARD grade product and not recommend for on-vehicle devices.|
|Sensor Type||Digital ALS|
|illuminance Measurement Range[lx]||0 to 65, 000|
|Operating Temperature (Min.)[°C]||-40|
|Operating Temperature (Max.)[°C]||70|
- ・I2C bus Interface ( f / s Mode Support, Slave address "0101001". )
・There are two outputs that peaks of a spectrum response are in visible light (Type0) and in infrared light (Type1).
・Illuminance to Digital Converter
・Very wide range and High resolution. ( 0.008 - 65535 lx )
・Low Current by power down function
・50Hz / 60Hz light noise reject-function
・Correspond to 1.8V logic input interface
・Light source dependency is little by calculating with Type0 and Type1.
( ex. Incandescent Lamp. Fluorescent Lamp. Halogen Lamp. White LED. Sun Light )
・Interrupt function is available.
・Adjustable measurement result for influence of optical window.
(It is possible to detect min. 0.001 lx, max. 100000 lx by using this function.)
・Small measurement variation (+/- 15%)
・Built in power on reset circuit.
Other New/Updated Products Relating to Sensors & MEMS
|PART NUMBER||Product Series||Datasheet||Distribution Inventory|
|BH1747NUC||Color Sensor ICs||inquiry|
|BU52092GWZ||Omnipolar Detection Hall ICs||inquiry|
|BU52095GWZ||Omnipolar Detection Hall ICs||inquiry|
|BU52097GWZ||Omnipolar Detection Hall ICs||inquiry|
|BU52098GWZ||Omnipolar Detection Hall ICs||inquiry|