1 to 2ch Lens Drivers for Single-lens Reflex Cameras - BD65499MUV

Single lens reflex (SLR) cameras use relatively large actuators compared to compact digital cameras. ROHM's lens drivers for SLRs integrate high voltage resistance and large current output in a compact surface mount package, making them ideal for compact SLR cameras of all types.

* This product is a STANDARD grade product and not recommend for on-vehicle devices.
Part number
Unit Quantity
Minimum Package Quantity
Packing Type
Constitution Materials List
BD65499MUV-E2 Active VQFN028V5050 2500 2500 Taping inquiry Yes
Grade Standard
Usage DSC with Single-lens
Number of Channels 1.0
Operating Temperature (Min.)[°C] -30
Operating Temperature (Max.)[°C] 85
  • ・1-channel H-Bridge driver for Full-On, High speed Drive
    ・Built-in DC/DC converter for voltage boost
    ・Low ON-resistance Power DMOS output: 0.2Ω Typ.( DC/DC converter NDMOS ) and 0.6Ω Typ.( H-Bridge DMOS )
    ・Charge pump-less type with p-channel DMOS of H-Bridge driver for the upper side transistor
    ・H-Bridge:The highest performance in regard to switching speed, and 2-values selection
        Turn On Time: 150ns & Turn Off Time: 60ns
    ・H-Bridge drive mode switch function
    ・DC/DC converter:Switching speed value selection
    ・Control input pins corresponding to the signal of 1.8V system
    ・UVLO (Under Voltage Lockout Protection)
    ・Built-in TSD (Thermal Shut Down) circuit
    ・Built-in OCP(Over Current Protection) circuit
    ・Standby current consumption 0μA Typ.
    ・Maximum output current for H-bridge: DC maximum 0.5A, Peak maximum 2.0A
Recent Clicks:
Other New/Updated Products Relating to Motor / Actuator Drivers
New Products:
Technical Data
Application Note

Thermal Resistance