Parallel interface Lens driver for STM - BD6360GUL
The BD6360GUL was developed specifically for stepping motors in auto focus and zoom applications. The parallel interface requires just a control signal from the microcontroller in order to drive the motor.
|* This product is a STANDARD grade product and not recommend for on-vehicle devices.|
|Operating Temperature (Min.)[°C]||-25|
|Operating Temperature (Max.)[°C]||85|
- ・Ultra-small chip size package：2.1mm×2.1mm×0.55mm (H=Max)
・Low ON-Resistance Power CMOS output：on high and low sides in total typ. 1.00Ω
・ESD resistance (Human Body Model) : 8kV
・Built-in voltage-regulator circuit for photo-interrupter and comparator circuits with hysteresis for photo-interrupter output waveform
・Input mode selection function (1.8V can be put into each control input terminal)
・Built-in UVLO (Under Voltage Locked Out : UVLO)
・Built-in TSD (Thermal Shut Down) circuit
・Standby current consumption : 0μA Typ.
Other New/Updated Products Relating to Motor / Actuator Drivers