Downloading...
 
product-image
 

300mA Output LDO Regulator with 2ch RESET - BD4269EFJ-C

BD4269EFJ-C is a low quiescent voltage regulator with 45V absolute maximum voltage allowing usage in battery direct-connected systems. IC integrates Power on and under-voltage reset and Input voltage reset for VCC or other voltages. Quiescent current is minimized to optimize the system current consumption. Power on and under-voltage reset and Input voltage reset threshold voltage can be adjusted by external resistance. Power on and under-voltage reset delay time can programmed set by external capacitor.

Part number
Status
Package
Unit Quantity
Minimum Package Quantity
Packing Type
RoHS
BD4269EFJ-CE2 Active HTSOP-J8 2500 2500 Taping Yes
 
Specifications:
Grade Automotive
ch 1
Vin(Min.)[V] 5.5
Vin(Max.)[V] 45.0
Vout (Typ.) [V] 5
Vout Precision ±2.0%
Iout(Max.)[A] 0.3
Circuit Current[mA] 0.07
Shutdown Function No
Thermal Shut-down Yes
Over Current Protection Yes
Under Voltage Lock Out Yes
Load Regulation[mV] 10
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 150
Features:
    • Low ESR ceramic capacitors applicable for output.
    • Low drop voltage: PDMOS output transistor
    • Power on and under-voltage reset
    • Sense input comparator for VCC or other voltage
    • Adjustable power on and under-voltage reset and Sense input comparator by external resistance
    • Programmable reset delay time by external capacitor.
 
 
RELATED PRODUCTS
Other New/Updated Products Relating to Power Management
PART NUMBER Product Name Package Datasheet Distribution Inventory
BD42754FPJ-C 500mA Output LDO Regulatorwith Voltage Detector TO252-J5   Buy Sample
BD42754FP2-C 500mA Output LDO Regulator with Voltage Detector TO263-5F   inquiry
BD4269FJ-C 5V LDO Regulator with 2ch RESET SOP-J8   Buy Sample
BD4275FP2-C 500 mA Output LDO Regulator with Voltage Detector TO263-5F   Buy Sample
BD4275FPJ-C 500 mA Output LDO Regulator with Voltage Detector TO252-J5F   inquiry
New Products:
 
 
Technical Data
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.