Downloading...
 
product-image
 

1.8V to 5.5V, 300mA 1ch Synchronous Boost DC/DC Converter - BU34DV7NUX

The BU34DV7NUX devices provide a power supplysolution for products powered by either two-cell alkaline,NiCd or NiMH, or one-cell Li-ion or Li-polymer battery.
Output currents can go as high as 300mA while usingtwo alkaline, and discharge it down to 1.8 V.
With the MODE pin, the BU34DV7NUX provides modeselection of PWM control or PFM/PWM automaticswitching control. When load current is large, theproduct switches automatically to the PWM mode so thathigh efficiency is achievable over a wide range of loadconditions. The maximum peak current in the boostswitch is typically limited to a value of 1.85A.
BU34DV7NUX output voltage is fixed by an internalresistor divider. When VIN voltage is higher than 3.4 V,Vout is connected with Vin.

* This product is a STANDARD grade product and not recommend for on-vehicle devices.
número de peça
Estado de Condição
pacote
Quantidade Unidade
Quantidade mínima Package
tipo de embalagem
Constituição Lista de Materiais
RoHS
BU34DV7NUX-GE2 Active VSON010X3030 4000 4000 Taping inquiry sim
 
especificações:
Grade Standard
ch 1
Integrated FET / Controller Integrated FET
Buck / Boost / Buck-Boost / Inverting Boost
Synchronous / Nonsynchronous Synchronous
Vin1(Min.)[V] 1.8
Vin1(Max.)[V] 5.5
Vout1(Min.)[V] 3.4
Vout1(Max.)[V] 3.4
Iout1(Max.)[A] 0.3
SW frequency(Max.)[MHz] 0.7
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
características:
  • ・ Synchronous Boost DC/DC Converter(PFM/PWM) 300mA @Vout=3.4V, Vin=1.8V
    ・Fixed Output voltage (3.4V)
    ・Pass-Through Function1 (VIN > VOUT<3.4V>)
    ・Thermal Shutdown
    ・VSON010X3030 (Small Package)
 
 
Dados técnicos
Application Note

Capacitor Calculation for Buck converter IC

Application Note

Inductor Calculation for Buck converter IC

Application Note

Resistor Value Table to set Output Voltage of Buck Converter IC

Application Note

Thermal Resistance

Application Note

PCB Layout Techniques of Buck Converter

Application Note

The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit

Application Note

Calculation of Power Loss (Synchronous)

Application Note

Considerations for Power Inductors Used for Buck Converters