Downloading...
 
product-image
 

6.0-18V 2A 2ch Buck converter - BD9302FP

The BD9302FP is a 2channel step-down switching regulator controller with a 2.5MHz, 2A power switch and available 2.5MHz high speed switching frequency with external resistance, supporting for a wide input voltage range of 6 to 18V.

* This product is a STANDARD grade product and not recommend for on-vehicle devices.
número de peça
Estado de Condição
pacote
Quantidade Unidade
Quantidade mínima Package
tipo de embalagem
Constituição Lista de Materiais
RoHS
BD9302FP-E2 Active HSOP25 2000 2000 Taping inquiry sim
 
especificações:
Grade Standard
ch 2
Integrated FET / Controller Integrated FET
Buck / Boost / Buck-Boost / Inverting Buck
Synchronous / Nonsynchronous Nonsynchronous
Vin1(Min.)[V] 6.0
Vin1(Max.)[V] 18.0
Vout1(Min.)[V] 0.8
Vout1(Max.)[V] 14.4
Iout1(Max.)[A] 2.0
Vin2(Min.)[V] 6.0
Vin2(Max.)[V] 18.0
Vout2(Min.)[V] 0.8
Vout2(Max.)[V] 14.4
Iout2(Max.)[A] 2.0
SW frequency(Max.)[MHz] 2.5
Light Load mode No
EN No
PGOOD No
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 85
características:
  • ・2ch Switching regulator
    ・200kHz to 2.5MHz Operating Frequency
    ・Wide operating INPUT Range 6 to 18V
 
 
Dados técnicos
Application Note

Capacitor Calculation for Buck converter IC

Application Note

Inductor Calculation for Buck converter IC

Application Note

Resistor Value Table to set Output Voltage of Buck Converter IC

Application Note

Thermal Resistance

Application Note

PCB Layout Techniques of Buck Converter

Application Note

The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit

Application Note

Calculation of Power Loss (Synchronous)

Application Note

Considerations for Power Inductors Used for Buck Converters