Downloading...
 
product-image
 

Step-down, High-efficiency Switching Regulators (Controller type) - BD63536FJ

The BD63536FJ is a gate direct drive switching regulator operational at a power supply voltage from 3V. This regulator uses a compact package SOP-J8 and operates as a switching regulator for the voltage control type of step-down DC/DC converter. The regulator features reliable design with ±1% reference voltage accuracy, built-in current limit function (±4%), and a variety of built-in protection circuits.

* This product is a STANDARD grade product and not recommend for on-vehicle devices.
número de peça
Estado de Condição
pacote
Quantidade Unidade
Quantidade mínima Package
tipo de embalagem
Constituição Lista de Materiais
RoHS
BD63536FJ-E2 Active SOP-J8 2500 2500 Taping inquiry sim
 
especificações:
Grade Standard
ch 1
Integrated FET / Controller Controller
Buck / Boost / Buck-Boost / Inverting Buck
Synchronous / Nonsynchronous Nonsynchronous
Vin1(Min.)[V] 3.0
Vin1(Max.)[V] 30.0
Iout1(Max.)[A] 0.1
SW frequency(Max.)[MHz] 0.3
Light Load mode No
EN No
PGOOD No
Operating Temperature (Min.)[°C] -25
Operating Temperature (Max.)[°C] 85
características:
  • ・Gate direct drive available (External Pch FET, Vcc-5.4V)
    ・Built-in current limit function (150mV±4%)
    ・Built-in gate-off function
    ・Error amplifier reference voltage (1.25V±1%)
    ・Built-in soft start
    ・2.5V regulator output
    ・External oscillation frequency variable
    ・Built-in thermal shutdown circuit
 
 
Pin Configuração:
Pin Configration
 
 
Dados técnicos
Application Note

Capacitor Calculation for Buck converter IC

Application Note

Inductor Calculation for Buck converter IC

Application Note

Resistor Value Table to set Output Voltage of Buck Converter IC

Application Note

Thermal Resistance

Application Note

PCB Layout Techniques of Buck Converter

Application Note

The Important Points of Multi-layer Ceramic Capacitor Used in Buck Converter circuit

Application Note

Calculation of Power Loss (Synchronous)

Application Note

Considerations for Power Inductors Used for Buck Converters