300mA Output LDO Regulator with 2ch RESET - BD4269EFJ-C
BD4269EFJ-C is a low quiescent voltage regulator with 45V absolute maximum voltage allowing usage in battery direct-connected systems. IC integrates Power on and under-voltage reset and Input voltage reset for VCC or other voltages. Quiescent current is minimized to optimize the system current consumption. Power on and under-voltage reset and Input voltage reset threshold voltage can be adjusted by external resistance. Power on and under-voltage reset delay time can programmed set by external capacitor.
|Vout (Typ.) [V]||5|
|Over Current Protection||Yes|
|Under Voltage Lock Out||Yes|
|Operating Temperature (Min.)[°C]||-40|
|Operating Temperature (Max.)[°C]||150|
- Low ESR ceramic capacitors applicable for output.
- Low drop voltage: PDMOS output transistor
- Power on and under-voltage reset
- Sense input comparator for VCC or other voltage
- Adjustable power on and under-voltage reset and Sense input comparator by external resistance
- Programmable reset delay time by external capacitor.
|Número de peça||Nome do Produto||Pacote||Datasheet||Inventário de distribuição|
|BD42754FPJ-C||500mA Output LDO Regulatorwith Voltage Detector||TO252-J5||comprar|
|BD42754FP2-C||500mA Output LDO Regulator with Voltage Detector||TO263-5F||comprar|
|BD4269FJ-C||5V LDO Regulator with 2ch RESET||SOP-J8||comprar|
|BD4275FP2-C||500 mA Output LDO Regulator with Voltage Detector||TO263-5F||comprar|
|BD4275FPJ-C||500 mA Output LDO Regulator with Voltage Detector||TO252-J5F||inquérito|
The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.
A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...
Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.
A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...
Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...
The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...
When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.
This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.
This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.
Provides some hints on how to connect LDOs in parallel.