Termination Regulator for DDR-SDRAMs - BD3537FBD3537F is a termination regulator that complies with JEDEC requirements for DDR-SDRAM, This linear power supply uses a built-in N-channel MOSFET and high-speed OP-AMPS specially designed to provide excellent transient response. It has a sink/source current capability up to 1.8A and has a power supply bias requirement of 5.0V for driving the N-channel MOSFET. For BD3537F, ceramic capacitor can be used as output capacitor enabling significant package profile downsizing as the total regulator part.
| ||||
| * This product is a STANDARD grade product and not recommend for on-vehicle devices. | ||||
| Grade | Standard |
| ch | 1 |
| Vin(Min.)[V] | 4.75 |
| Vin(Max.)[V] | 5.25 |
| Vin 2ch[V] | 1.746 to 1.854 |
| Iout(Max.)[A] | 1.8 |
| Circuit Current[mA] | 1.0 |
| Thermal Shut-down | Yes |
| Under Voltage Lock Out | Yes |
| Soft Start | Yes |
| Operating Temperature (Min.)[°C] | -30 |
| Operating Temperature (Max.)[°C] | 100 |
- Incorporates a Push-Pull Power Supply for Termination (VTT)
- Incorporates an Enabler
- Incorporates an Undervoltage Lockout (UVLO)
- Incorporates a Thermal Shutdown Protector (TSD)
- Compatible with Dual Channel (DDR-II)
- Incorporates Soft-start Function
Thermal Resistance
Basics of Linear Regulators
Linear Regulator Specifications
Thermal Calculation for Linear Regulator
Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)
Reverse Voltage Protection
Power Source ON/OFF Characteristics for Linear Regulator
Simple Test Method for Estimating the Stability of Linear Regulators
BAxxCC0 Series Circuit Using a Ceramic Output Capacitor
For ICs