Downloading...
 
product-image
 

Termination Regulator for DDR-SDRAMs - BD3533HFN

BD3533HFN is a termination regulator that complies with JEDEC requirements for DDR-SDRAM. This linear power supply uses a built-in N-channel MOSFET and high-speed OP-AMPS specially designed to provide excellent transient response. It has a sink/source current capability up to 1A and has a power supply bias requirement of 3.3V to 5.0V for driving the N-channel MOSFET. By employing an independent reference voltage input (VDDQ) and a feedback pin (VTTS), this termination regulator provides excellent output voltage accuracy and load regulation as required by JEDEC standards. Additionally, BD3533 has a reference power supply output (VREF) for DDR-SDRAM or for memory controllers. Unlike the VTT output that goes to "Hi-Z" state, the VREF output is kept unchanged when EN input is changed to "Low", making this IC suitable for DDR-SDRAM under "Self Refresh" state.

* This product is a STANDARD grade product and not recommend for on-vehicle devices.
número de peça
Estado de Condição
pacote
Quantidade Unidade
Quantidade mínima Package
tipo de embalagem
RoHS
BD3533HFN-TR Active HSON8 3000 3000 Taping sim
 
especificações:
Grade Standard
ch 1
Vin(Min.)[V] 2.7
Vin(Max.)[V] 5.5
Vout (Typ.) [V] 0.75 to 1.25
Iout(Max.)[A] 1.0
Thermal Shut-down Yes
Under Voltage Lock Out Yes
Operating Temperature (Min.)[°C] -20
Operating Temperature (Max.)[°C] 100
características:
  • · Incorporates a Push-Pull Power Supply for Termination (VTT)
    · Incorporates a Reference Voltage Circuit (VREF)
    · Incorporates an Enabler
    · Incorporates an Under Voltage Lockout (UVLO)
    · Incorporates a Thermal Shutdown Protector (TSD)
    · Compatible with Dual Channel (DDR-2)
 
 
PRODUTOS RELACIONADOS
Outros Novo / Atualizado produtos em relação aPower Management
Número de peça Nome do Produto Pacote Datasheet Inventário de distribuição
BD3531F Termination Regulator for DDR-SDRAMs SOP8   comprar
BD3532F Termination Regulator for DDR-SDRAMs SOP8   comprar
BD3537F Termination Regulator for DDR-SDRAMs SOP8   comprar
BD3538F Termination Regulator for DDR-SDRAMs SOP8   comprar
BD3538HFN Termination Regulator for DDR-SDRAMs HSON8   comprar
BD35395FJ-M Termination Regulator for DDR-SDRAMs SOP-J8   comprar
New Products:
 
 
Dados técnicos
Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.