Downloading...
In-Vehicle 1ch Low Side Switch - BD1LB500FVM-CBD1LB500FVM-C is an in-vehicle 1ch low side switch. This switch builds in the overcurrent limiting circuit, thermal shutdown circuit, open load detection circuit and under voltage lock out circuit. It also provides the diagnostic output circuit when an abnormality is detected.
| ||||
especificações:
| Grade | Automotive |
| Channel Number [ch] | 1 |
| Drain-Source Voltage (Max.)[V] | 42.0 |
| Output Current[A] | 0.8 |
| ON Resistance [mΩ] | 350 |
| Over Current Detect [A] | 0.8 |
| Active Clamp Energy [mJ] | 25.0 |
| Supply Voltage(Min.)[V] | 3.5 |
| Supply Voltage(Max.)[V] | 5.5 |
| Current consumption(Typ.)[µA] | 500 |
| Thermal Shut Down | Self-restart |
| Open Load Detect [V] | 2.0 |
| Status Terminal | Available |
| Junction Temperature Tj (Min.)[°C] | -40 |
| Junction Temperature Tj (Max.)[°C] | 150 |
características:
- Built-in overcurrent limiting circuit
- Built-in thermal shutdown circuit (TSD)
- Built-in open load detection circuit (at output OFF)
- Enables direct control from CMOS logic ICs, etc.
- Low standby current
- Built-in under voltage lock out circuit
- Built-in diagnostic output (ST) terminal
- Low ON resistance RDS (ON) =350mΩ (Typ) (VDD=IN=5V,
- Ta=25°C, IOUT=0.25A)
- Built-in overvoltage protection (active clamp) for output circuit
- Monolithic power IC in which the control unit (CMOS) and power MOSFET are incorporated into one chip
- 1ch low side switch for driving mechanical relay coil
- AEC-Q100 Qualified
PRODUTOS RELACIONADOS
Outros Novo / Atualizado produtos em relação aPower Management
New Products: