Downloading...
 
product-image
 

2A Variable Output LDO Regulators - BD00D0AWHFP

ROHM's LDO regulators continue the trend towards increasing miniaturization and greater power efficiency and are optimized for power supplies of all types. The broad lineup includes low saturation fixed output types in 1A/2A/0.3A ratings, models with different output voltages and packages, and units with/without a shutdown switch. In addition, overcurrent and thermal shutdown circuits are integrated to prevent IC destruction due to output short-circuit and IC overload respectively.

* This product is a STANDARD grade product and not recommend for on-vehicle devices.
número de peça
Estado de Condição
pacote
Quantidade Unidade
Quantidade mínima Package
tipo de embalagem
RoHS
BD00D0AWHFP-TR Active HRP5 2000 2000 Taping sim
 
especificações:
Grade Standard
Breakdown Voltage(Max.)[V] 35.0
ch 1
Vin(Min.)[V] 4.0
Vin(Max.)[V] 25.0
Vout (Typ.) [V] 3 to 15
Vout Precision ±1.0
Iout(Max.)[A] 2.0
Circuit Current[mA] 0.5
Shutdown Function Yes
Thermal Shut-down Yes
Over Current Protection Yes
I/O Voltage Difference (Typ.)[V] 0.4(Io=1A)
Ripple Rejection [dB] 55.0
Load Regulation[mV] Vo x 0.7%(Io=5mA to 1A)
Input Capacitor[µF] 1.0
Output Capacitor[µF] 2.2
Operating Temperature (Min.)[°C] -40
Operating Temperature (Max.)[°C] 105
características:
  • ・Maximum output current: 2A
    ・Output voltage accuracy: ±1%
    ・Ultra-low saturation with PDMOS output
 
 
PRODUTOS RELACIONADOS
Outros Novo / Atualizado produtos em relação aPower Management
Número de peça Nome do Produto Pacote Datasheet Inventário de distribuição
BD80C0AFPS-C For Automotive 1A, 8.0V Output LDO Regulator TO252S-3   inquérito
BD00FD0WHFP 35V Voltage Resistance 2A LDO Regulators HRP5   inquérito
BD15FD0WHFP 35V Voltage Resistance 2A LDO Regulators HRP5   inquérito
BD18FD0WHFP 35V Voltage Resistance 2A LDO Regulators HRP5   inquérito
BD25FD0WHFP 35V Voltage Resistance 2A LDO Regulators HRP5   inquérito
BD30FD0WHFP 35V Voltage Resistance 2A LDO Regulators HRP5   inquérito
New Products:
 
 
Dados técnicos
Reference Circuits and Bomlist

Reference Circuits and Bomlist

Table of resistance for output voltage setting on linear regulator Ics

This application notes provide tables for each series so that it is easy to set the resistance value for the output voltage setting from various internal reference voltages VREF.

Thermal Resistance

The definition and how to use thermal resistance and thermal characterization parameter of packages for ROHM’s integrated circuit are described in this application note.

BDxxC0A, BDxxD0A Series PCB Layout

The basic terminal configuration of a linear regulator IC consists of four parts: input, output, GND, and feedback…

Basics of Linear Regulators

A linear regulator, also referred to as a "three-terminal regulator" or "dropper," is a power supply long known to many designers owning to its simple circuitry and ease of use...

Linear Regulator Specifications

Very important information such as maximum ratings, operating conditions and characteristic graphs are described in the table.

Reverse Voltage Protection

A linear regulator integrated circuit (IC) is a DC-to-DC buck converter system that reduces a DC supply from higher voltage level to a lower voltage level...

Simple Test Method for Estimating the Stability of Linear Regulators

Low drop-out (LDO) regulators developed back in the age when large-capacitance multi-layer ceramic capacitors (hereinafter, MLCCs) were uncommon cause a phase delay, leading to oscillation when connected to a low-ESR capacitor like an MLCC...

Thermal Calculation for Linear Regulator

The loss in linear regulators increases as the difference between the input and output voltages increases. Since most of the loss is converted to heat, a very large amount of heat may be generated in some conditions...

Power Source ON/OFF Characteristics for Linear Regulator

When a linear regulator IC is turned ON, the electric charge is stored in the output capacitor and the output voltage increases up to the specified value.

BAxxCC0 Series Circuit Using a Ceramic Output Capacitor

This application note proposes a circuit using an output ceramic capacitor that allows a stable phase compensation.

Measurement Method for Phase Margin with Frequency Response Analyzer (FRA)

This application note introduces a method for easily measuring the phase margin with a Frequency Response Analyzer (FRA) made by NF Corporation.

Connecting LDOs in Parallel

Provides some hints on how to connect LDOs in parallel.