BD9848FV | Large Current External FET Switching Regulator Controllers | Switching Regulators | ICs

Single / Dual-output High-frequency, Step-down
Switching Regulators (Controller type)

BD9848FV

Data Sheet

Data Sheet (219K)

Technical Data

Package

RoHS

Application notes

Design Model

Quality information

FAQ

[ Product description ]

BD9848FV is an IC containing two circuits of switching regulator controller by pulse width modulation system.
Both of two circuits can be used for step-down DC/DC converter operation.
In addition, the package is designed compact, and is optimum for compact power supply for many kinds of equipment.

Specifications
Number of output	2
Supply Voltage (V)	3.6 to 35
Output drive current (mA)	±1000
Output type	Push Pull
reference voltage accuracy (%)	±1.0
frequency (kHz)	100 to 1500
Package size (mm)	6.4×6.5×1.25

[ Pin Configuration ]

Features

・High voltage resistance input (Vcc=35V)
・FET driver circuit is contained (step-down circuit 2 output).
・Error amplifier reference voltage (1.0V±1%) and REG output circuit (2.5V) are contained.
・Over current detection circuit is contained. (Continuous detection of 5 cycles)
・Soft start and pause period can be adjusted.
・Three modes of standby, master, and slave can be switched. (Iccs = 0µA typ in standby mode.)
・ON / OFF control is enabled independently for each channel. (DT terminal)

*The contents described here are just outline for introduction.
Please obtain the specification sheets from us for thorough check before use.

Status Product

Part No.	Package (PDF)	Status *	RoHS	Constitution materials list	Packing Type	Unit Quantity	Minimum Packaging Quantity	Sales	Distribution Inventory
BD9848FV-E2	SSOP-B20	Active	Yes		Embossed Tape And Reel	2500	2500	Inquiry