BD65491FV | System Lens Drivers for Digital Cameras/SLRs (Single-lens Reflex) | Motor Drivers | ICs

1 to 2ch Lens Drivers for Single-lens Reflex Cameras

BD65491FV NEW

Data Sheet

Data Sheet (357K)

Technical Data

Package

RoHS

Application notes

Design Model

Quality information

FAQ

[ Product description ]

Single lens reflex (SLR) cameras use relatively large actuators compared to compact digital cameras. ROHM's lens drivers for SLRs integrate high voltage resistance and large current output in a compact surface mount package, making them ideal for compact SLR cameras of all types.

Specifications
Supply voltageVcc (V)	2.5 to 5.5
Supply voltageVM (V)	1.8 to 16.0
Driver output max. current (A)	1.2(DC), 4.0(peak)
Output channel (ch)	1
Input interface	Parallel
FULL ON Drive block (ch)	1
Turn on time (ns)	150
Turn off time (ns)	50
Control frequency (kHz)	500(Max.)
Package size(mm)	5.0×6.4×1.25

[ Pin Configuration ]

Features

・Low ON-Resistance Power DMOS output: Full-ON Drive block with 0.35Ω Typ.
・Range of motor power supply voltage: 1.8V to 16.0V
・Charge pump-less type with p-channel DMOS for the upper side transistor
・The highest performance in regard to switching speed, and 4-values selection
Turn On Time: 150ns & Turn Off Time: 50ns
・Drive mode switch function
・Maximum output current for H-bridge: DC maximum 1.2A, Peak maximum 4.0A
・Control input pins corresponding to the signal of 1.8V system
・Built-in UVLO (Under Voltage Lockout Protection) function & TSD (Thermal Shut Down) circuit
・Standby current: 0µA Typ.

*The contents described here are just outline for introduction.
Please obtain the specification sheets from us for thorough check before use.

Status Product

Part No.	Package (PDF)	Status *	RoHS	Constitution materials list	Packing Type	Unit Quantity	Minimum Packaging Quantity	Sales	Distribution Inventory
BD65491FV-E2	SSOP-B16	Active	Yes		Embossed Tape And Reel	2500	2500	Inquiry